HFE 1703S is a 187 ton, down-acting hydraulic press brake with a bedlength of 10 feet. There are 148" between the frames, with an open height of17.7". The maximum travel distance of the ram is 7.0", and the maximum bendlength that can be formed is 171". The ram repeatability is 0.0004", whilethe backgauge can travel 27.5".The HFE 1703S has an Operateur CNC control, which is used to control theram and backgauge, as well as other appropriate functions. The control has theability to program the machine in either GRAPHICS Mode, ANGLE Mode, DEPTH Modeor to reverse the ram based on tonnage. The HFE 1703S also features a 16"throat, sectionalized punch holders with fast release clamp, a larger brakefor staging a variety of complex parts, a foot pedal, and a hand wheel.System SpecificationsPress BrakeCapacity: 187 U.S. tonsBed Length: 122 inchesMaximum Stroke Length: 7.8 inchesOpen Height: 18.5 inchesThroat Depth: 16.5 inchesDistance Between Side Frames: 106 inchesRam Repeatability: +/- 0.0004 inchesAdvance Speed: 472 IPMPress Speed: 2 - 47 IPMReturn Speed: 2.4 - 472 IPMOverall Weight: 25,520 lbs.Overall Dimensions: 14' L x 8' W x 9'6" HMachine Power: 27.5 KWFoundation: 6 inch concrete slabBackgaugeModelAmada Type BRepeatability: X Axis +/- 0.0004 inchesMovement RangeX Axis 27.5/37.5 inchesR Axis 9.84 inchesZ Axis 137 inchesFeed SpeedX Axis 19.5 inches per secondR Axis 6.2 inches per secondZ Axis 39.3 inches per second .
TORGIM
TRN.PAG.O564
height of centre from table mm.400
height of centre from carriage mm.280
distance between frames mm.5000
bench width mm.415
notch width mm.450
Max swing over table mm.825
Max swing over notch mm.970
Max swing over slide mm.600
spi...
